How to ensure the finish of the fabric of all cotton flame retardant clothing

The surface finish of all cotton flame retardant fabric is an important factor affecting the appearance quality of the product. So how to ensure the finish of the fabric of all cotton flame retardant fabric? It also needs to be taken from the source.

As a manufacturer of all cotton flame retardant clothing fabric, Xinxiang Yulong Textile Co., Ltd. has the special function of not easy to ignite and self extinguish. Besides, the glossiness of the fabric surface has been improved comprehensively. After all, the surface finish of the flame retardant fabric is an important factor affecting the appearance quality of the products. So how to ensure the finish of the fabric of all cotton flame retardant fabric? It also needs to be taken from the source.

1. strictly control the quality of the blank, and the quality of the blank will affect the quality of the flame retardant fabric. In terms of physical indicators, we should not only pay attention to the length, door width, but also select the blank cloth with clear dry, no flowers and no blank strips. At the same time, the inspection of appearance defects shall be strengthened to prevent unqualified blank cloth from flowing into the workshop.
2. strengthen the control of the firing process, and make different processes according to different varieties of the firing process, among which the fabric organization and specification are deeply related to the processing. Strictly control the quantity, temperature, speed and distance between fabric and fire port. It is necessary to make appropriate adjustment according to the characteristics of gas and the performance of the fire port, and resolutely prevent the occurrence of wool.
3. strengthen the pretreatment, strengthen the pre-treatment process, provide guarantee for the later process of flame retardant clothing fabric, and reduce the use of chemical additives. For the later heavy cotton fabrics, cold stack is used to roll, to ensure the wool effect of semi-products, to reduce the consumption of processing technology, and to provide qualified and environmental protection semi-products for dyeing.
4. ensure that the alkali concentration will cause permanent expansion of cotton fiber mercerizing treatment, obtain permanent high mercerizing luster, and strengthen the luster strength and dyeing performance to improve the stability of the fabric expansion and deformation.
5. the drying method of dyeing is first infrared pre drying. Xinxiang Yulong Textile Co., Ltd. is the manufacturer of all cotton flame retardant clothing fabric, adopts 2 rows of infrared pre drying device, and the drying rate of the dye solution of cloth surface after infrared pre drying is about 30%. The fabric is dried by hot air after infrared pre drying, and then dried by drying cylinder, In this way, the non-contact drying is gradually contact drying, which can effectively avoid the dye swimming and make the fabric surface obtain good finish.

Well, we will introduce you to this area about how to ensure the finish of the fabric surface of all cotton flame retardant clothing fabric. I hope sharing can help you. Of course, if there are any questions about the flame retardant fabric of all cotton, or if there is any doubt in the article, welcome to note that we will solve the confusion for you at the first time.