How to Recognize Clothing’s Better Quality or Bad Quality?

Checking the clothing’s quality, first we should check length/breast/neck/fleece/shoulder/trousers/hips/waist; check if the size is correct, generally the tolerance is less than 1.5%. After checking the specs, most important is to check clothing’s inner quality. The method is eye checking/ measured checking/strictly checking. Better we do eye checking before fitting on.

(1)Upper: checking from front/back/side. Front, watch neck’s two side angle if they are evenness, without any higher or lower/ skew phenomenon, it should be stick, and neck size is suitable for neck, neck lining cannot be revealed outside; pocket position is evenness, scapula is wide and comfort, back length is plain and suitable, side and most important to see shoulder seam is straight, clothing’s sleeve is plain/evenness, cannot have the defection of irregularity or paneling. And then checking the sleeve is consistence, hem is straight and plain etc...

(2)Trousers: it divided to plain/upper/3 dimension checking. Plain checking, put seam together, average down, see if the seam is plain and straight/ breakout, side seam is plain, pocket spacer is suitable, size same. Then take one leg opening, check if the crotch seam is align, plain, no breakout, and if it is plain with back seam cross, leg opening’s down crotch seam is align, leg opening is up or down. Checking upper, mainly check if waist is plain, no fat no tight, seam is evenness, back pocket is fitness, plain, flap is suitable, position is accurate, front fly / lining matched is suitable / plain; zipper is flexible; 3D checking, put waist up according to shape, check front and back seam is plain, seam/ leg is plain no breakout.

(3)Fabric checking: check if there are defections, color difference, and damage by worms, bite by mouse etc.. If there have, it is not conforming to standard.