en11612 cotton flame retardent coverall

Description

Definition

EN11612 cotton flame retardant coverall is a one‑piece full‑body protective overall manufactured from 100% cotton fabric with flame‑retardant finishing, complying with the European standard EN 11612 for protective clothing against heat and flame. This standard specifies performance requirements for garments exposed to radiant heat, convective heat and brief flame contact in industrial environments.

Material & Construction

100% Cotton: Natural cotton fibre offers good breathability, moisture absorption and soft hand‑feel, reducing heat stress for long‑time wearers.
Flame retardant finishing: The cotton substrate is treated with durable flame‑retardant chemistry (such as Proban or Pyrovatex). The fabric will self‑extinguish after removing the ignition source and resist flame spread.
Coverall: One‑piece design covering torso, arms and legs, minimizing exposed skin for comprehensive body coverage.
EN 11612: European standard for heat‑ and flame‑protective clothing. It defines test criteria for flame spread, radiant heat resistance, convective heat resistance and mechanical properties for industrial protective apparel.

Core Performance

Flame & heat protection: Resists ignition, limits flame propagation and self‑extinguishes once away from fire source; delivers protection against radiant and convective heat.
Superior wear comfort: Natural cotton provides excellent air permeability and sweat absorption, suitable for long‑shift industrial work.
Full‑body coverage: Integrated coverall structure lowers risk of skin burns caused by splashes of sparks or hot particles.
Standard‑verified performance: Each garment meets EN 11612 test indexes for thermal and mechanical requirements.

Advantages

✅ Comfortable, breathable natural cotton material

✅ Compliant with EU EN 11612 heat‑flame protection requirement

✅ Good skin‑friendliness, low static accumulation compared with synthetic‑heavy blends

✅ Mature solution for petrochemical, welding‑adjacent and thermal‑hazard workshops

More details

There has pocket on anti-static coverall left sleeve.
0.6cm single visible stitching on the anti-static coverall’s shoulder,arm hole,front&back fly,outside seam.beautiful and firm.
Rubber band on waist line fits more people in different body form.
Double closed metal zipper closed to the collar in Front fly with the pull loop. The anti-static coverall cover the zipper, zipper teeth will not appear.
Slant pockets on each side of the anti-static coverall.
Kneecap to increase wearing resistance.
Bar-tacking on all stress points to increase the fastness.

Standards

EN ISO 11611	Protective clothing for use in welding and allied processes
EN ISO 11612	Protective clothing – Clothing to protect against heat and flame
EN ISO 14116	Protective clothing - Protection against heat and flame
NFPA70E	Standard for Electrical Safety in the Workplace
NFPA2112	Standard on Flame-Resistant Garments for Protection of Industrial Personnel Against Flash Fire
Oeko-Tex Standard 100 Class 2	Tested for harmful substances, approved to be used in direct contact with skin

Size Chart

Measurements are in inches.

Size	Neck	Chest	Waist	Sleeve
S	14 - 14.5	34 - 36	28 - 30	32.5 - 33
M	15 - 15.5	38 - 40	32 - 34	33.5 - 34
L	16 - 16.5	42 - 44	36 - 38	34.5 - 35
XL	17 - 17.5	46 - 48	40 - 42	35.5 - 36
2XL	18 - 18.5	50 - 52	44 - 46	36.5 - 37
3XL	19 - 19.5	54 - 56	48 - 50	37 - 37.5
4XL	20 - 20.5	58 - 60	52 - 54	37.5 - 38
5XL	21 - 21.5	62 - 64	56 - 58	38 -38.5

Hint: For the most accurate results, measure yourself in your undergarments.

Neck: Measure around the base of your neck, inserting your forefinger between the tape and your neck to allow ease in fit.

Chest: Measure around the fullest part of your chest, keeping tape firmly under your armpits and around your shoulder blades.

Waist: Measure around your waist, slightly below your natural waist, where you normally wear your pants. Insert your forefinger between the tape and your body to allow ease in fit.