What are The Requirements for The Design and The Flame Retardant Material of Protective Flame Retardant Clothing?

1, Structural Design

Flame retardant clothing contains cap, jacket, pants, coat and shoe flap.

1) The structural design of the flame retardant clothing must meet the following requirements: handiness and with a certain firmness, easy to move; easy to wear and take off, wish a certain comfort; more commonly, the pocket of the flame retardant clothing always with flap, to avoid accumulation splashing molten metal etc pollutants. Sewing and processing procedures are according to GB2661-81.

2) The flame retardant clothing must be left aeration pore in the right place, benefit to sweat and regulate body temperature. But the gap of the air breather could not affect the garment structural strength, and the structural gap could not make the outside particles entering into the clothing inside.

2, Flame Retardant Material

1) fabric requirement: adopt after flame retardant treatment and tolerated many times washing fabric.(put complex detergent in washing machine, according to the general laundry concentration, 60℃ temperature, 15 minutes washing time, washed 50 times).

2) stitches requirement: synthetic fiber yarn is banned.

3) Accessories: buckle, hook etc should be easy to connection and set free. The material of buckle and hook should not use fusible material.(inside buckle and hook are not affected by this restriction).