wide reflective FR striping around arms, legs and over the shoulders
Under arm vents
Concealed two-way, black high-density polyester coil zip with storm flap
One pocket on left arm
Two chest pockets with flaps
Shoulder pleats for freedom of movement and comfort
Two side pockets with hidden exterior-to-interior access
Concealed back mesh vented panel
Cargo pocket withconcealed zipand hook-and-loop closure on left leg
|EN ISO 11611||Protective clothing for use in welding and allied processes|
|EN ISO 11612||Protective clothing – Clothing to protect against heat and flame|
|EN1149-1||Protective clothing. Electrostatic properties. Test method for measurement of surface resistivity|
|NFPA2112||Standard on Flame-Resistant Garments for Protection of Industrial Personnel Against Flash Fire|
|Oeko-Tex Standard 100 Class 2||Tested for harmful substances, approved to be used in direct contact with skin|
Measurements are in inches.
|S||14 - 14.5||34 - 36||28 - 30||32.5 - 33|
|M||15 - 15.5||38 - 40||32 - 34||33.5 - 34|
|L||16 - 16.5||42 - 44||36 - 38||34.5 - 35|
|XL||17 - 17.5||46 - 48||40 - 42||35.5 - 36|
|2XL||18 - 18.5||50 - 52||44 - 46||36.5 - 37|
|3XL||19 - 19.5||54 - 56||48 - 50||37 - 37.5|
|4XL||20 - 20.5||58 - 60||52 - 54||37.5 - 38|
|5XL||21 - 21.5||62 - 64||56 - 58||38 -38.5|
Hint: For the most accurate results, measure yourself in your undergarments.
Neck: Measure around the base of your neck, inserting your forefinger between the tape and your neck to allow ease in fit.
Chest: Measure around the fullest part of your chest, keeping tape firmly under your armpits and around your shoulder blades.
Waist: Measure around your waist, slightly below your natural waist, where you normally wear your pants. Insert your forefinger between the tape and your body to allow ease in fit.